home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 1 / Cream of the Crop 1.iso / BUSINESS / STATHELP.ARJ / README.1ST < prev    next >
Text File  |  1991-12-26  |  30KB  |  581 lines

  1.  
  2.    -----------------------------------------------------------------------
  3.                STATHELP INSTALLATION & QUICKSTART INFORMATION
  4.    -----------------------------------------------------------------------
  5.  
  6.                                        
  7.                      ___________________________________
  8.                     |                                   |
  9.                     |        WELCOME TO STATHELP        |
  10.                     |                                   |
  11.                     |            Featuring              |
  12.                     |                                   |
  13.                     |    WATSTAT, LOOKUP, and RANDO     |
  14.                     |                                   |
  15.                     |    A Trio of Statistical Tools    |
  16.                     |    for Both Novice and Expert     |
  17.                     |          Number Crunchers         |
  18.                     |                                   |
  19.                     |      From Hawkeye Softworks       |
  20.                     |___________________________________|
  21.    
  22.    
  23.  
  24.  
  25.              CONTENTS                                         Page
  26.          ==========================================================
  27.           Copyright Notice & Warranty Disclaimer  -------------  1
  28.           What is STATHELP? What's on the Disk?----------------  2
  29.           About Shareware, the ASP, and the ASP Ombudsman -----  3
  30.           About the Shareware Version of STATHELP -------------  3
  31.           Registration Information ----------------------------  4
  32.           Installation Instructions ---------------------------  5
  33.           Running the STATHELP Programs (Quick Start)  --------  7
  34.           Registration Form  ---------------------------------- 10
  35.          ==========================================================
  36.  
  37.    ================
  38.    COPYRIGHT NOTICE
  39.    ================
  40.    
  41.         WATSTAT, LOOKUP and RANDO are Copyright 1991 by Hawkeye Softworks,
  42.         300 Golfview Ave., Iowa City, IA, 52246, All Rights Reserved.
  43.    
  44.         The windows and menus used in these programs were implemented with
  45.         Vermont Views, a C language function library Copyright 1988, 1989
  46.         by Vermont Creative Software, Pinnacle Meadows, Richford, VT,
  47.         05476, All Rights Reserved.
  48.    
  49.         The programs were compressed and converted to a self-extracting
  50.         archive file with software provided under licence by PKWARE, Inc.,
  51.         7545 N. Port Washington Road, Glendale, WI, 53217.
  52.  
  53.    ===================
  54.    WARRANTY DISCLAIMER
  55.    ===================
  56.    
  57.         WATSTAT, LOOKUP, and RANDO, and the accompanying documentation
  58.    carry no warranty, expressed or implied, as to their merchantability or
  59.    fitness for a particular purpose.  In no event will the copyright
  60.    holder be liable for damages arising from the use of, or defects in,
  61.    the STATHELP programs.
  62.  
  63.                                     Page 2
  64.    
  65.    
  66.    ======================================
  67.    WHAT IS STATHELP?  WHAT'S ON THE DISK?
  68.    ======================================
  69.    
  70.         There are three self-contained programs that together make up the
  71.    STATHELP package.  They are:
  72.    
  73.    1. WATSTAT -- A computerized STATISTICAL CONSULTANT that advises you on
  74.       what statistical procedures to use.  It first asks you a series of
  75.       questions about your data, design, and analytical focus.  Then, it
  76.       displays a report advising you on what descriptive statistics and
  77.       significance tests are likely to meet your needs.  Optionally, this
  78.       advisory report can be sent to your printer.  A tutorial is provided
  79.       for first-time users and HELP WINDOWS can be popped up whenever you
  80.       need assistance.  (We wanted to call this program "WHATSTAT," but
  81.       someone else has already used that name.)
  82.    
  83.    2. LOOKUP -- A program that calculates probabilities ("p-values) for five
  84.       different statistical tests: z, t, F, Chi-Square, and the Binomial.
  85.       LOOKUP replaces the tables found in the back of most statistics text-
  86.       books and is more extensive than most such tables.
  87.    
  88.    3. RANDO -- A program that generates several types of random numbers that
  89.       can be used for random sampling, running simulations, randomly assign-
  90.       ing experimental treatments, or even playing lotteries.
  91.          It generates: 1) Uniformly distributed integers ranging between
  92.       user-specified minimum and maximum values; 2) Uniformly distributed
  93.       decimals ranging from 0.0 to 1.0; 3) Normally distributed numbers with
  94.       Mean=0.0 and SD=1.0; 4) Normally distributed numbers with any Mean and
  95.       Standard Deviation you specify; 5) random 1's and 0's with any user-
  96.       specified proportion of 1's; 6) randomized orders of integers ranging
  97.       from 1 to N, with maximum N=20; 7) "standard" lottery numbers, as used
  98.       in "Lotto" games; and 8) "Pick N" lottery numbers, where numbers range
  99.       from 0 to 9 and where duplications are allowed.
  100.    
  101.         All three STATHELP programs are menu-driven and provide help
  102.    messages to guide every operation.  If you have an EGA or VGA color
  103.    monitor, menus and windows are displayed in a variety of colors.
  104.         Some familiarity with statistical terms and concepts is required
  105.    to use these programs appropriately, but if you've had an introductory
  106.    course in statistics you should have little difficulty with them.
  107.         "Quick start" information about running these programs is provided
  108.    later in this README.1ST file.  More complete operating instructions
  109.    are provided in a text file called SHMANUAL.DOC, which will be copied
  110.    to the disk you specify when you install the STATHELP programs, as
  111.    explained below.
  112.  
  113.         You're probably anxious to install and run STATHELP, and we're just
  114.    as anxious to have you try it out.  But please take a few more moments to
  115.    peruse the next few sections, which briefly explain about the shareware
  116.    distribution system and the shareware version of STATHELP.  This material
  117.    is repeated in the user's manual (SHMANUAL.DOC)) mentioned above, so if
  118.    you can't pause to read it now, you should read it in the manual.
  119.    
  120.  
  121.                                     Page 3
  122.  
  123.  
  124.    ===============================================
  125.    ABOUT SHAREWARE, THE ASP, AND THE ASP OMBUDSMAN
  126.    ===============================================
  127.  
  128.         Shareware is a distribution method that gives you a chance to try
  129.    out and evaluate software before buying it.  If you find that the software
  130.    meets your needs, and if you continue to use it after a reasonable
  131.    evaluation period, you are expected to REGISTER with the author and pay a
  132.    set fee.  Shareware authors get no compensation from the distributors of
  133.    their software; they are paid for their work only through registration
  134.    fees.  And shareware will continue to exist only if users support it.
  135.  
  136.         Hawkeye Softworks is a member of the Association of Shareware
  137.    Professionals (ASP), an association for shareware authors and distributors,
  138.    whose goals are to set standards for the shareware system and to educate
  139.    its members and the public about shareware.  ASP maintains an Ombudsman
  140.    office to mediate disputes between ASP members and their customers, and
  141.    has published the following statement regarding its Ombudsman service:
  142.  
  143.       The ASP wants to make sure that the shareware principle works for
  144.       you.  If you are unable to resolve a shareware-related problem with
  145.       an ASP member by contacting the member directly, ASP may be able to
  146.       help.  The ASP Ombudsman can help you resolve a dispute or problem
  147.       with an ASP member, but does not provide technical support for members'
  148.       products.  Please write to the ASP Ombudsman at 545 Grover Road,
  149.       Muskegan, MI, 49442, or send a CompuServe message via CompuServe mail
  150.       to ASP Ombudsman 70007,3536.
  151.  
  152.   =======================================
  153.   ABOUT THE SHAREWARE VERSION OF STATHELP
  154.   =======================================
  155.  
  156.         The STATHELP programs on this disk are Shareware programs.  Whether
  157.    or not you register, you may make multiple copies these programs and
  158.    distribute them freely to friends, user groups, computer bulletin boards,
  159.    etc., so long as the following conditions are met:
  160.  
  161.      1. Anyone distributing the STATHELP programs for any kind of remuneration
  162.         must first contact Hawkeye Softworks, at the address given below, for
  163.         authorization.  This authorization will be granted automatically to
  164.         distributors recognized by The Association of Shareware Professionals
  165.         as adhering to its guidelines, and such distributors may begin
  166.         offering STATHELP immediately.  However, they must still notify
  167.         Hawkeye Softworks, to ensure that they are supplied with the latest
  168.         version of STATHELP.
  169.  
  170.      2. The programs must be distributed in unaltered form; program names
  171.         must not changed; and copyright notices must not be removed.
  172.  
  173.      3. The file you are now reading, called README.1ST, and the file called
  174.         SHMANUAL.DOC, must be distributed, in unaltered form, along with the
  175.         programs.  If STATHELP is distributed in compressed form, as you
  176.         received it, the three files called SHZIPARC.EXE, SINSTALL.BAT, and
  177.         README.1ST must all be distributed together, in unaltered form.
  178.  
  179.    We encourage you to pass copies of STATHELP to your friends for evaluation.
  180.    When you do, please encourage them to register their copies if they intend
  181.    to use them regularly.
  182.  
  183.                                     Page 4
  184.  
  185.  
  186.    ========================
  187.    REGISTRATION INFORMATION
  188.    ========================
  189.  
  190.         In accord with the Shareware concept, this version of the STATHELP
  191.    package gives you the opportunity to try WATSTAT, LOOKUP, and RANDO at
  192.    nominal cost.  If you find that you like them and continue to use them,
  193.    please print and fill out the REGISTRATION FORM provided at the end of
  194.    this file and send it along with the Registration fee of $20 in U.S.
  195.    dollars (or $10 if you are an enrolled student) to Hawkeye Softworks, 
  196.    at the address given on the REGISTRATION FORM.
  197.  
  198.    Registered users will receive:
  199.  
  200.      1. The next update/revision of the STATHELP programs, as soon as
  201.         available.  (We expect to produce updates, with major enhancements,
  202.         about once per year.)  The next version of WATSTAT will provide
  203.         references to standard textbooks where you can find more information
  204.         about the procedures it recommends.  The next LOOKUP will optionally
  205.         report "critical values" for probabilities you specify and report
  206.         proportions under the Normal curve between any two ordinates.  The
  207.         next RANDO will optionally send output to a file and allow you
  208.         to merge RANDO output with your own data file.
  209.  
  210.      2. A USER'S MANUAL for the revised version, containing a Glossary of all
  211.         the statistical terms you'll need, as well as explaining how to use
  212.         all the features of the STATHELP programs.  (If you'd also like a
  213.         laser-printed manual for your current version of STATHELP, which is
  214.         the same as the SHMANUAL.DOC file that is supplied with the shareware
  215.         version of STATHELP, just circle "YES" on the Registration Form.)
  216.  
  217.      3. Free technical support, by mail or Fax, for a full year from the date
  218.         your Registration is received.
  219.  
  220.      4. Notices of new products from Hawkeye Softworks, at special discount
  221.         prices for registered STATHELP users.
  222.  
  223.   ============
  224.   INSTALL NOW?
  225.   ============
  226.  
  227.       Installation instructions begin in the next section.  We suggest that
  228.   you merely skim them now, to get a general idea of what's involved,
  229.   and then print a hard copy of this README.1ST file, so the instructions
  230.   will be at your fingertips when you begin the installation.  To print this
  231.   file, type:
  232.  
  233.          PRINT README.1ST  (then press the [ENTER]) 
  234.  
  235.  
  236.                                     Page 5
  237.    =========================
  238.    INSTALLATION INSTRUCTIONS
  239.    =========================
  240.    
  241.         The STATHELP programs CANNOT be run from the distribution disk.
  242.    They're compressed into a single archive file called SHZIPARC.EXE, and
  243.    must be decompressed (Installed) before they can be run.
  244.    
  245.         For the curious: the name SHZIPARC.EXE is an acronym for STATHELP
  246.    (SH) ZIP ARCHIVE (ZIPARC).  It was created with PKWARE's archive
  247.    program PKZIP and converted to a self-extracting archive with their
  248.    ZIP2EXE program.  Because it's an EXE file, SHZIPARC executes (extracts
  249.    its own archived files) when you type its name.  BUT DON'T DO THAT
  250.    YOURSELF.  We've provided a special installation program that executes
  251.    SHZIPARC for you.  Please read on.
  252.    
  253.         You should first make a backup copy of the distribution disk, using
  254.    DOS's DISKCOPY command.  Then, put the distribution disk in a safe place
  255.    and use the backup for the installation procedure.
  256.  
  257.         The STATHELP programs require a total of about 470K bytes of disk
  258.    space once they're decompressed, so they can all be installed on a
  259.    single 3.5" or High Density 5.25" diskette.  But you should install
  260.    them on a hard disk if you have one, because they'll run much faster
  261.    that way.  If your computer has no hard drive and has only one or two
  262.    360K floppy drives, skip down to the special instructions given in the
  263.    section called "INSTALLING STATHELP ON 360K FLOPPY DRIVES."
  264.    
  265.         The simplest way to install the STATHELP programs is to use the
  266.    install batch file, called SINSTALL.BAT, which is supplied on the
  267.    distribution disk.  Put the backup disk you've just made into a
  268.    diskette drive and make that drive "active" by typing the appropriate
  269.    drive name.  For example, if you want to install from drive A:, type:
  270.    
  271.                       A:    (and press the [ENTER] key).
  272.    
  273.    Then run SINSTALL by typing a command of the following form:
  274.    
  275.                       SINSTALL FROM_DRIVE TO_DRIVE TO_DIRECTORY
  276.    
  277.    For example, if you want to install FROM the A: Drive TO the C: Drive,
  278.    in a TO_DIRECTORY called STATHELP, you'd type:
  279.    
  280.                       SINSTALL A: C: \STATHELP
  281.    
  282.    Then, SINSTALL will take care of all the installation details for you.
  283.    It will catch most errors you may make and tell you how to correct
  284.    them.  If you forget any of the instructions given here, simply type
  285.    SINSTALL, without any drive or directory names, and you'll get an on-
  286.    screen synopsis on how to use the SINSTALL program.
  287.    
  288.         Always type a colon (:) after drive letters (e.g., A:) and type a
  289.    backslash (\) preceding directory names (e.g., \STATHELP).
  290.  
  291.         If you're installing TO a hard drive, the STATHELP programs are
  292.    always copied to a directory.  If the TO_DIRECTORY you specify does not
  293.    exist, it'll be created for you.  If you don't specify a TO_DIRECTORY,
  294.  
  295.                                     Page 6
  296.  
  297.  
  298.    a directory with the default name, \STATHELP, will be created.  You may
  299.    specify a new directory to be nested under one that already exists; for
  300.    example, you may specify \UTILS\STATHELP, where \UTILS already exists
  301.    and \STATHELP is new sub-directory within it.
  302.         If you're installing TO a floppy disk, you need not specify a
  303.    TO_DIRECTORY.  If you do, SINSTALL will simply ignore it.
  304.         If you're installing FROM a floppy disk, SINSTALL will not allow
  305.    you to install TO the same disk; e.g., you can't install FROM A: TO A:.
  306.    
  307.    INSTALL NOW?
  308.    ------------
  309.    
  310.         You should now have all the information you need to proceed with
  311.    the installation.  But first, you should at least skim the remainder of
  312.    this file to see what it contains.  Then, you'll know where to find help
  313.    if you encounter problems, want to modify the installation, or need
  314.    information about running the STATHELP programs.
  315.    
  316.    WHAT IF THE INSTALL PROGRAM WON'T WORK?
  317.    ---------------------------------------
  318.    
  319.         If, after repeated tries, you can't get SINSTALL to work, you may
  320.    be able to do the installation yourself, according to the instructions
  321.    given below.
  322.    
  323.    IF YOU HAVE A HARD DRIVE
  324.         First create a directory, e.g., \STATHELP, with DOS's MD command.
  325.    Then change to that directory with the CD command and COPY all the
  326.    files from the backup distribution disk to your new directory.  Then,
  327.    without changing directories, type:
  328.    
  329.                  SHZIPARC                (and press the [ENTER] key).
  330.    
  331.    If this doesn't work, chances are that the self-extracting archive
  332.    file, SHZIPARC.EXE has been damaged.  If it does work, you can delete
  333.    SHZIPARC.EXE from the hard disk, since you'll have no further need for it.
  334.    Use DOS's ERASE or DEL commands to delete SHZIPARC.EXE.
  335.    
  336.    IF YOU HAVE NO HARD DRIVE, BUT HAVE A 3.5" OR HIGH DENSITY 5.25" DRIVE
  337.         First copy SHZIPARC.EXE from the backup distribution disk to a blank
  338.    disk on this Drive.  Make this Drive the "Active" Drive, by typing its
  339.    name from the DOS command line, and then type:
  340.    
  341.                  SHZIPARC                (and press the [ENTER] key).
  342.    
  343.    If you get a "Disk Full" error, delete all the STATHELP files that
  344.    SHZIPARC decompressed before the error occurred, since they may have
  345.    been corrupted.  Then, follow the instructions given for 360K floppies
  346.    in the next section.
  347.         If this installation was successful, you may want to delete
  348.    SHZIPARC.EXE from the disk, so you'll have enough room to copy this
  349.    README.1ST to it.
  350.    
  351.    INSTALLING STATHELP ON 360K FLOPPY DRIVES
  352.    -----------------------------------------
  353.    
  354.         Before proceeding with the installation explained below, consider
  355.    asking someone who has a hard disk to install STATHELP on their machine
  356.  
  357.                                     Page 7
  358.  
  359.  
  360.    and to copy the files to 360K disks for you.  Copy all files beginning
  361.    with "W" to one floppy disk and all remaining files to a second.  (All
  362.    "W" files must be on the same disk in order to run WATSTAT.)  Then, you
  363.    can run WATSTAT from the first disk and LOOKUP and RANDO from the
  364.    second.  This is the easier way, but it's not much more difficult to
  365.    install directly to 360K floppies, as shown below.
  366.    
  367.         Because the self-executing archive file, SHZIPARC.EXE, allows you
  368.    to install one file at a time, you should be able to decompress all the
  369.    files on 360K drives.
  370.    
  371.    IF YOU HAVE TWO 360K FLOPPY DRIVES
  372.         Put the backup distribution disk in Drive A: and a blank diskette in
  373.    Drive B:.  Make B: the "Active" Drive, by typing B: from the DOS
  374.    command line.  Then, type:
  375.    
  376.              A:SHZIPARC W*.*            (and press the [ENTER] key).
  377.    
  378.    This will decompress and copy all the WATSTAT files, those beginning
  379.    with "W," to your B: Drive.  Now, put a new blank diskette in the B:
  380.    and type:
  381.    
  382.              A:SHZIPARC LOOKUP.EXE      (and press the [ENTER] key).
  383.    
  384.    Wait for LOOKUP.EXE to be installed on B:, and then type:
  385.    
  386.              A:SHZIPARC RANDO.EXE       (and press the [ENTER] key).
  387.    
  388.    Wait for RANDO.EXE to be installed on B:, and then type:
  389.    
  390.              A:SHZIPARC SHMANUAL.DOC    (and press the [ENTER] key).
  391.    
  392.    Now, you're ready to run the STATHELP programs.  Run WATSTAT from the
  393.    first diskette and LOOKUP and RANDO from the second.
  394.    
  395.    IF YOU HAVE ONLY ONE 360K FLOPPY DRIVE
  396.         You'll need to extract the STATHELP files one at a time, and copy
  397.    each file to another disk before extracting the next.  To do this,
  398.    you'll need to know the names of all the files in the archive, so write
  399.    down the eight file names listed below, and be sure to spell them 
  400.    exactly as given.
  401.    
  402.         WATSTAT.EXE  WATSTAT.TXT  WATSTAT.HLP  WATSTAT.INX
  403.    
  404.         WATUT.EXE    LOOKUP.EXE   RANDO.EXE    SHMANUAL.DOC
  405.    
  406.         Have 3 blank, formatted disks ready, and label them "Disk1,"
  407.    "Disk2", and "Disk3."  Put the backup distribution disk in Drive A: and
  408.    copy the archive file to Disk1 by typing:
  409.    
  410.              COPY SHZIPARC.EXE B:     (and press the [ENTER] key).
  411.    
  412.    When DOS tells you, "Insert diskette for drive B: and strike any key
  413.    when ready," replace the distribution disk with Disk1 and press a key.
  414.    When it's finished copying, DOS will tell you to re-insert the
  415.    distribution disk.  And, if your computer has little memory, DOS may
  416.    tell you to exchange disks again.  When the copying is finished, insert
  417.    Disk1 into the drive.  Then, follow the 3 steps given below.
  418.    
  419.                                     Page 8
  420.  
  421.  
  422.    STEP 1 -- Extract the first file from the archive by typing:
  423.    
  424.              SHZIPARC WATSTAT.EXE     (and press the [ENTER] key).
  425.    
  426.    STEP 2 -- With Disk1 still in the Drive, type:
  427.    
  428.              COPY WATSTAT.EXE B:      (and press the [ENTER] key).
  429.    
  430.    When DOS tells you to "Insert diskette for drive B: ...," replace Disk1
  431.    with Disk2, and WATSTAT.EXE will be copied to Disk2.  When this is
  432.    done, remove Disk2 and insert Disk1.
  433.    
  434.    STEP 3 -- Delete WATSTAT.EXE from Disk1 by typing:
  435.    
  436.              DEL WATSTAT.EXE          (and press the [ENTER] key).
  437.    
  438.    Now, you're ready to extract the next file.  Repeat the above three
  439.    steps, but substitute the name of the second file, WATSTAT.TXT,
  440.    wherever the name WATSTAT.EXE is used above.
  441.         Repeat the above three steps for the remaining files whose names
  442.    begin with "W."  When this is done, Disk2 will contain all the files
  443.    needed to run WATSTAT.  Label it appropriately and set it aside.
  444.         Then extract the remaining files to Disk3 by repeating the above
  445.    three steps, each time substituting the appropriate file name wherever
  446.    "WATSTAT.EXE" is used.  When this is done, Disk3 will contain all the
  447.    files needed to run LOOKUP and RANDO, and will also contain the manual
  448.    file, SHMANUAL.DOC.  Label Disk3 appropriately, and you're finished
  449.    with the installation.
  450.    
  451.    CHANGING THE INSTALLATION FOR LOOKUP (FOR HARD DISKS ONLY)
  452.    ----------------------------------------------------------
  453.    
  454.         The above installation is suitable at the outset, until you get
  455.    familiar with the STATHELP programs.  But later you'll find that one of
  456.    the programs, LOOKUP, should be installed elsewhere: it's designed as a
  457.    quick reference tool, and is handiest when it can be popped up from any
  458.    directory you happen to be working in.  This means that the file called
  459.    LOOKUP.EXE should be moved to a directory that is on your SEARCH PATH.
  460.    If you don't know which directories are on your SEARCH PATH, type
  461.    "PATH" (without quotes) from the DOS command line.  This will show you
  462.    a list of directories that DOS searches when you try to run a program
  463.    that isn't in the current directory.
  464.         If you have a directory where you store miscellaneous utility
  465.    programs and batch files, that would be the ideal place for LOOKUP.  If
  466.    there is no other appropriate directory on your SEARCH PATH, you may
  467.    want to put LOOKUP in the root directory of your hard drive.
  468.         Once you've decided where to move LOOKUP, change to that directory
  469.    with the CD command and copy LOOKUP.EXE  to that directory with the
  470.    COPY command .  For example, to copy from a directory "\STATHELP" on
  471.    the C: drive, type:
  472.    
  473.         COPY C:\STATHELP\LOOKUP.EXE       (and press the [ENTER] key).
  474.    
  475.         At this point you'll have two copies of LOOKUP.EXE on your hard
  476.    disk, and you'll want to remove the extra copy from your original
  477.    TO_Directory.  Go to that directory with the DOS CD command and delete
  478.    the extra copy of LOOKUP.EXE with DOS's DEL or ERASE commands.
  479.  
  480.                                     Page 9
  481.  
  482.  
  483.         PLEASE NOTE: The remaining STATHELP programs, WATSTAT and RANDO,
  484.    should be kept where you originally installed them.  WATSTAT must
  485.    access a number of subsidiary files, and it must be run from the
  486.    directory that contains all its files.  On the other hand, RANDO may be
  487.    moved to another directory, but it's probably best to keep it where you
  488.    originally installed it, so you'll always remember where to find it.
  489.    
  490.  
  491.    ===========================================
  492.    RUNNING THE STATHELP PROGRAMS (Quick Start)
  493.    ===========================================
  494.    
  495.    To run any one of the STATHELP programs, simply type its name:
  496.    
  497.                     WATSTAT        (and press the [ENTER] key), or
  498.                     LOOKUP         (and press the [ENTER] key), or
  499.                     RANDO          (and press the [ENTER] key).
  500.    
  501.    FOR HARD DISK USERS -- If the STATHELP programs are stored in a
  502.    directory that is not the "active" ("default") directory, you'll need
  503.    to go to that directory with DOS's CD command before typing a program
  504.    name.  (If you moved LOOKUP to a directory on the SEARCH PATH, as
  505.    described in the preceding section, you can run LOOKUP from any drive
  506.    or directory on your system LOOKUP.)
  507.  
  508.         The best way to learn about WATSTAT is to select "Run Tutorial"
  509.    from its MENU.  The tutorial takes only about 10 minutes, but tells you
  510.    all you need to know about running WATSTAT.
  511.  
  512.         The best way to learn about LOOKUP and RANDO is simply by running
  513.    them: after 15 minutes or so, you should be quite proficient.
  514.  
  515.         For more details on running the STATHELP programs, consult the
  516.    manual file, SHMANUAL.DOC.  It can be read by any text editor or word
  517.    processor or sent to your printer with the DOS PRINT command.
  518.    
  519.  
  520.                                    Page 10 
  521.  
  522.    The form below is for your convenience in registering.  Just print it on a
  523.    dot-matrix printer, fill it out, and send it along with $20 in US dollars
  524.    ($10 for currently enrolled students) to the address given on the form.
  525.    If you can't print the form, a hand-drawn facsimile will do.
  526. ------------------------------------------------------------------------------
  527.    ==========================           Mail to:  Hawkeye Softworks
  528.    STATHELP REGISTRATION FORM                     300 Golfview Avenue
  529.    ==========================                     Iowa City, IA 52246
  530.  
  531.    NAME ________________________________________________  DATE: ________
  532.  
  533.    ADDRESS __________________________________________________
  534.            __________________________________________________
  535.            __________________________________________________
  536.            __________________________________________________
  537.  
  538.    PHONE (Optional) __________________________
  539.  
  540.    Would you like a laser-printed copy of SHMANUAL?  YES  NO (circle one)
  541.  
  542.    What is the Version Number displayed on your screen when you run:
  543.      WATSTAT _______    LOOKUP _______    RANDO _______
  544.      [If you don't have the most current version, we'll automatically
  545.       send one, in addition to the next upgrade.]
  546.  
  547.    Where did you get your shareware version of the STATHELP programs?
  548.    [If from a dealer, please give their name & approximate purchase date.]
  549.     __________________________________________________________________
  550.  
  551.    What features would you like to see in subsequent versions of STATHELP?
  552.  [Use reverse side or attach additional pages if needed. We value your views]
  553.    _______________________________________________________________________
  554.    _______________________________________________________________________
  555.    _______________________________________________________________________
  556.    _______________________________________________________________________
  557.    _______________________________________________________________________
  558.    _______________________________________________________________________
  559.  
  560. ------------------------------------------------------------------------------
  561.         When registering, feel free to include comments about the STATHELP
  562.    programs and suggestions for improving them.  If you are an instructor
  563.    or student in a statistics course, please send information about your
  564.    textbook, so we can include references to it in the next version of
  565.    WATSTAT.  User input will guide further development of the STATHELP
  566.    programs and, we hope, lead to new programs to be added to the package.
  567.         Whether or not you register, please also report any bugs you may
  568.    find and provide as much detail as you can about them.  That is, besides
  569.    describing symptoms of a bug, explain what you were doing just before
  570.    it occurred, whether it always occurs under certain conditions, what
  571.    brand and model of computer and printer you have, what DOS version
  572.    you're using, and what other software (particularly TSR's) may have
  573.    been in your computer's memory at the time.  If possible, print copies
  574.    of your AUTOEXEC.BAT and CONFIG.SYS files and send those too.
  575.    **********************************************************************
  576.       We believe that you'll find these programs educational and useful
  577.      for serious and creative work.  We're hopeful that you'll also find
  578.      them fun to play with.  Yes, statistics can be fun!
  579.    **********************************************************************
  580. 
  581.